AirLift Aeration Overview

Our AirLift™ and AirLift XL™ pond and lake aeration systems are designed and built to completely mix and aerate ponds and smaller lakes. Our AirLift™ and AirLift XL™ systems use billions of micron sized bubbles to cost effectively improve water quality.

The AirLift XL™ series is most often installed in deeper ponds and lakes that exceed 20 feet in water depth. This often can result in using less aeration tubing resulting is greater cost savings for those customers with deeper ponds and lakes.

 Our AirLift and AirLift XL Series pond and lake aeration systems come with either one (1) or two (2) of our standard air compressors.  Our AirLift Series aeration systems can accept up to six (6) AirPod air diffusers. Our AirLift XL Series aeration systems can accept up to four (4) AirPod XL air diffusers.

Our AirLift HighFlow™ lake aeration systems are designed and built to completely mix and aerate larger lakes and reservoirs or difficult to manage ponds that require more aeration. For lakes over 25 acres, many customers prefer to install multiple AirLift HighFlow aeration systems rather than a single larger, custom aeration system. By doing so, this allows those customers with aeration system redundancy in case there is an equipment failure.

Similar to our AirLift and AirLift XL Series, our AirLift HighFlow Series use billions of micron sized bubbles to cost effectively improve water quality. Our AirLift HighFlow Series comes standard with two HighFlow air compressors and four (4) to ten (10) AirPod air diffusers. The AirPod air diffusers in the AirLift HighFlow Series can be upgraded to AirPod XL air diffusers based on our your needs.

Hydro Logic designs and builds custom aeration systems for larger lake and reservoir aeration projects. We also manufacturer aeration systems for both commercial and industrial applications including: the oil and gas industry, acid mine drainage projects, wastewater treatment systems, aquaculture operations, agriculture irrigation projects and more.

Custom lake aeration systems are typically designed and installed in those lakes and reservoirs which are 50 acres in size or greater.  Our custom aeration systems often have either one or two large air compressors (5 to 150 HP) that are located at either a single or two different lake locations. Our largest custom aeration systems can accept over 100 AirPod XL air diffusers.

Custom lake aeration systems are ideal for those customers having larger lakes and reservoirs with limited access to place these larger air compressors. Most often, our larger air compressors are installed inside large enclosures or small buildings (sheds).

In addition to pond and lake aeration, our AirLift™ are excellent for de-icing waters around docks, boat slips and marinas. During the winter, deeper, warmer waters are moved to the surface thereby keeping all aerated areas free of ice.

The biggest advantage of using our AirLift Series aerators as de-icers is that all mechanical equipment is located onshore inside the air compressor cabinet. This makes any repair work a snap if for some reason that your de-icer unfortunately stops working.

In addition to reliability and durability, our AirLift™ and AirLift XL™ pond aerators and lake aeration systems were designed to be extremely energy efficient, thereby allowing you to enjoy low operating and maintenance costs for years to come.