Pond Aerator Replacement Parts

Aeration System Replacement Parts

Replacement Parts for Pond & Lake Aeration Systems

When it comes to aeration replacement parts or aeration system retrofits or upgrades – Aqua Link has you covered. Aqua Link carries replacement parts for Hydro Logic Products, AquaMaster, Kasco Marine, AirMax and Keeton pond and lake aeration systems (electric and solar powered units):

Air Compressors & Rebuild Kits
Air Compressor Air Filters
Air Diffusers
Aeration Tubing
And much, much, more…

Pond Aerator Air Compressor

Hydro Logic AirPod air diffusers come standard with all Hydro Logic AirLift aeration systems. These air diffusers are the most durable, efficient & largest air diffusers on the market today and extremely easy to install. Each air diffuser contains 1 large 24 in. rubber, EPDM tubular air diffuser securely attached to a highly stable base containing two ballast tubes. The single air diffuser is capable of handling airflow rates of 0.5 to 7.5 cfm. Overall, EPDM tube diffusers are far superior to air stones, porous media and even EPDM round disc diffusers. Hydro Logic standard EPDM tube diffuser is more than 2 ½ times larger than two 9″ EPDM disc diffusers. Our air diffusers are constructed to withstand total airflow from the compressors without damaging the EPDM membranes (unlike EPDM disc air diffusers).AirPod air diffusers are often purchased to replace Vertex AirStation air diffusers and air diffusers manufactured by Kasco, AquaMaster, Aqua Control and many others.

Additional parts required: either 3/8 (Part No. HLP DIF-DUWT375) or 5/8 inch fitting (Part No. HLP DIF-DUWT675) to connect AirPod diffuser to DownUnder weighted air supply tubing. Part No. HLP DIF-DUWT375 requires the use of stainless steel hose clamps (Part No. HLP HC-375).

Pond Aerator Air Compressor

Hydro Logic AirPod air diffusers come standard with all Hydro Logic AirLift aeration systems. These air diffusers are the most durable, efficient & largest air diffusers on the market today and extremely easy to install. Each AirPod contains 2 large 24 in. rubber, EPDM tubular air diffusers securely attached to a highly stable base containing two ballast tubes. The dual air diffusers are capable of handling airflow rates of 1 to 15 cfm. Overall, EPDM tube diffusers are far superior to air stones, porous media and even EPDM round disc diffusers. Each Hydro Logic standard EPDM tube diffuser is more than 2 ½ times larger than two 9″ EPDM disc diffusers. AirPod air diffusers are constructed to withstand total airflow from the compressors without damaging the EPDM membranes (unlike EPDM disc air diffusers).

AirPod air diffusers are often purchased to replace Vertex AirStation air diffusers and air diffusers manufactured by Kasco, AquaMaster, Aqua Control and many others.

Additional parts required: either 3/8 (Part No. HLP DIF-DUWT375) or 5/8 inch fitting (Part No. HLP DIF-DUWT675) to connect AirPod diffuser to DownUnder weighted air supply tubing. Part No. HLP DIF-DUWT375 requires the use of stainless steel hose clamps (Part No. HLP HC-375).

DownUnder 5/8 in. Aeration Tubing (100 ft. Boxed)

100 feet coiled and box DownUnder™ 5/8 in. diameter (0.625 inch I.D.) air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. Recommended for most Hydro Logic AirLift aeration systems installations – especially when water depths exceed 15 feet and tubing runs exceed 500 feet in length.

Sections of DownUnder™ tubing are connected together using standard PVC solvent weld cement and ½ inch insert fittings. DownUnder™ air supply tubing has low friction walls (0.625 inch I.D.) for maximizing airflow rates and minimizing air pressure drops. Our DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. The wall thickness of 0.225 inches provides long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.

Pond Aerator Air Compressor

Connects Hydro Logic AirPod Air Diffuser to 3/8 inch Hydro Logic DownUnder Aeration Tubing (Plastic Barbed x Threaded). Compatible with Hydro Logic AirLift and AirLift XL pond and lake aeration systems.

This fitting is used to connect AirPod tube diffuser to 3/8 inch (0.375 in.) DownUnder aeration tubing. Male threaded end screws into the tube diffuser and barbed end attaches to 3/8 inch DownUnder weighted aeration tubing using stainless steel hose clamps (Part No. HLP HC-375). Do not use PVC cement with this plastic fitting.

Pond Aerator Air Compressor

1/3 HP 220 Volt Thomas oiless, dual piston air compressor (220V/ Single Phase/ 60 Hz) with integral thermal motor overload protection. Air compressor produces up to 4.6 cfm and is rated for up to 40psi.

Pond Aerator Air Compressor

Hydro Logic air filter canister (silencer) for Thomas, Gast and Hydro Logic air compressors.

Requires replacement air filters (air filter elements) – Part No. HLP AF

Pond Aerator Air Compressor

Quantity per package: 6

Hydro Logic replacement air filters (air filter elements) for air filter canister (silencer). Air filter canister (silencer) is Part No. HLP AFC

Pond Aerator Air Compressor

Connects Hydro Logic AirPod Air Diffuser to 3/8 inch Hydro Logic DownUnder Aeration Tubing (Plastic Barbed x Threaded). Compatible with Hydro Logic AirLift and AirLift XL pond and lake aeration systems.

This fitting is used to connect AirPod tube diffuser to 3/8 inch (0.375 in.) DownUnder aeration tubing. Male threaded end screws into the tube diffuser and barbed end attaches to 3/8 inch DownUnder weighted aeration tubing using stainless steel hose clamps (Part No. HLP HC-375). Do not use PVC cement with this plastic fitting.

Air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. Recommended for most Hydro Logic AirLift aeration systems installations – especially when water depths exceed 15 feet and tubing runs exceed 500 feet in length.

Sections of DownUnder™ tubing are connected together using standard PVC solvent weld cement and ½ inch insert fittings. DownUnder™ air supply tubing has low friction walls (0.625 inch I.D.) for maximizing airflow rates and minimizing air pressure drops. Our DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. The wall thickness of 0.225 inches provides long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.

DownUnder 5/8 in. Aeration Tubing (500 ft. Reel)

500 feet coiled and box DownUnder™ 5/8 in. diameter (0.625 inch I.D.) air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. Recommended for most Hydro Logic AirLift aeration systems installations – especially when water depths exceed 15 feet and tubing runs exceed 500 feet in length.

Sections of DownUnder™ tubing are connected together using standard PVC solvent weld cement and ½ inch insert fittings. DownUnder™ air supply tubing has low friction walls (0.625 inch I.D.) for maximizing airflow rates and minimizing air pressure drops. Our DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. The wall thickness of 0.225 inches provides long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.

DownUnder 5/8 in. Aeration Tubing (200 ft Reel)

200 feet reel of Hydro Logic DownUnder™ 5/8 in. diameter (0.625 inch I.D.) air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. Recommended for most Hydro Logic AirLift aeration systems installations – especially when water depths exceed 15 feet and tubing runs exceed 500 feet in length.

Sections of DownUnder™ tubing are connected together using standard PVC solvent weld cement and ½ inch insert fittings. DownUnder™ air supply tubing has low friction walls (0.625 inch I.D.) for maximizing airflow rates and minimizing air pressure drops. DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. The wall thickness of 0.225 inches provides long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.

DownUnder 5/8 in. Aeration Tubing (100 ft. Boxed)

100 feet coiled and box DownUnder™ 5/8 in. diameter (0.625 inch I.D.) air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. Recommended for most Hydro Logic AirLift aeration systems installations – especially when water depths exceed 15 feet and tubing runs exceed 500 feet in length.

Sections of DownUnder™ tubing are connected together using standard PVC solvent weld cement and ½ inch insert fittings. DownUnder™ air supply tubing has low friction walls (0.625 inch I.D.) for maximizing airflow rates and minimizing air pressure drops. Our DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. The wall thickness of 0.225 inches provides long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.

DownUnder 3/8 in. Aeration Tubing (100 ft. Boxed)

100 feet coiled and box DownUnder™ 3/8 in. diameter (0.375 inch I.D.) air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. In general, best suited for shallow ponds when water depths are less than 10 feet and tubing runs do not exceed 300 feet in length.

Sections of DownUnder™ tubing are connected together using either brass or plastic barbed ½ inch insert fittings and stainless steel hose clamps. DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. Thick walled to provide long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.

DownUnder 3/8 in. Aeration Tubing (500 ft. Reel)

500 feet reel DownUnder™ 3/8 in. diameter (0.375 inch I.D.) air supply tubing used to connect Hydro Logic AirLift air compressors to AirPod air diffusers. DownUnder aeration tubing is constructed of a flexible PVC composite and is self-weighted in order to firmly remain along the pond or lake bottom after the installation. In general, best suited for shallow ponds when water depths are less than 10 feet and tubing runs do not exceed 300 feet in length.

Sections of DownUnder™ tubing are connected together using either brass or plastic barbed ½ inch insert fittings and stainless steel hose clamps. DownUnder™ tubing is designed to reduce the overall system pressure requirements and to extend the life of the air compressors. Thick walled to provide long-term durability and protection against kinking and punctures. The air supply tubing remains flexible in cold temperatures allowing for easy year-round installations.